Milk Entries

Milk Entry Straight Inlet, s/s (part number in yellow) Milk Entries

1.125.140 31-50mm (1½") [Int.14mm (9/16") Ext. 16mm (5/8")]

1.125.150 51-70mm (2") [Int.14mm (9/16") Ext. 16mm (5/8")]

1.125.160 62-83mm (2½-3") [Int.14mm (9/16") Ext. 16mm (5/8")]

1.126.170 31-50mm (1½") [Int.16mm (5/8") Ext. 18mm (5/8")]*

1.125.180 51-70mm (2") [Int.16mm (5/8") Ext. 18mm (5/8")]*

1.125.190 62-83mm (2½-3") [Int.16mm (5/8") Ext. 18mm (5/8")]*

1.125.075 31-50mm (1½") [Int.20mm (5/8") Ext. 22mm (5/8")]*

1.125.200 51-70mm (2") [Int.20mm (5/8") Ext. 22mm (5/8")]*

1.125.210 62-83mm (2½-3") [Int.20mm (5/8") Ext. 22mm (5/8")]*

1.125.230 51-70mm (2") [Int.24mm (5/8") Ext. 26mm (5/8")]*

1.125.240 62-83mm (2½-3") [Int.24mm (5/8") Ext. 26---mm (5/8")]*

1.125.140.jpg (4112 bytes)

Straight inlet for milk entry

1.131.100 straight inlet only 14/16

1.131.161 straight inlet only 16/18

1.132.201 straight inlet only 20/22

1.132.241 straight inlet only 24/26

1.131.161.jpg (5826 bytes)

Hose clamp cut stainless steel for milk entry

1.286.100 32-50mm (1.5")

1.287.100 50-70 mm (2")

1.287.500 60-80 (2.5" -3")

1.287.600 80-100 mm (3.5" - 4")

1.286.100.jpg (3784 bytes)

Rubber Gaskets For Milk Entry straight tube

1.289.016 26mm x 23mm Ų 16mm

1.289.018 29mm x 29mm Ų 18mm

1.290.016 35mm x 33mm Ų 16mm

1.290.018 35mm x 33mm Ų 18mm

1.290.022 35mm x 33mm Ų 22mm

1.290.024 35mm x 33mmŲ 22mm

Plastic Milk Entry Blue

For Tube Bore

1.284.450 40mm(1 1/2”) 14mm(9/16”)

1.284.550 50mm(2”) 14mm(9/16”)

1.285.400 40mm(1 1/2”) 16mm(5/8”)

1.285.500 50mm(2”) 16mm(5/8”)

1.285.400.jpg (4801 bytes)

Rubber Gaskets For Milk Entry plastic

1.273.100 Upper Gasket for milk entry plastic

1.274.100 Lower gasket for milk entry plastic

wpe7.jpg (1557 bytes)

Milk Entries Stainless Steel

For Tube Bore

1.279.140 30-42mm 14mm(9/16”)

1.280.140 45-52mm 14mm(9/16”)

1.279.160 30-42mm 16mm(5/8”)

1.280.160 45-52mm 16mm(5/8”)

1.280.200 50-75mm 16mm(5/8”)

1.279.160.jpg (4800 bytes)

Gaskets for milk entry stainless steel

1.288.014 Upper Gasket For 1.279.140 & 1.280.140

1.288.016 Upper Gasket For 1.279.160 & 1.280.160

wpe8.jpg (1832 bytes)

Sliding Tap 180° Stainless Steel

1.281.000 Tube = 14 x 16mm For Part #’s 1.279.140, 1.280.140, 1.284.450, 1.284.550

1.281.160 Tube = 16 x 18mm For Part #’s 1.279.160, 1.280.160, 1.285.400, 1.285.500

1.281.000.jpg (3441 bytes)

Reverse 180° Sliding Tap Stainless Steel

1.281.200 Tube = 16 x 18mm

1.281.300 Tube = 14 x 16mm

1.281.200.jpg (3408 bytes)

Sliding Plate

1.283.000 For Part #’s 1.279.000, 1.280.000, 1.284.000,

wpe9.jpg (1774 bytes)